What aspects of the flexible conveyor should be understood?

The diversification, versatility, and low-carbon environmental protection of flexible conveyors have attracted people's attention. To learn more about flexible conveyors, please take a look.

Here is the content list:

What should be paid attention to during transportation and storage?

What are the common faults and solutions?

How to deal with the deviation of the conveyor belt?

What should be paid attention to during transportation and storage?

During transportation, the flexible conveyor shall comply with the relevant regulations of the transportation department and shall not be in contact with acids and alkalis. Drive devices and electrical equipment should avoid severe vibrations and impacts such as scratches, bumps, and drops. Rainproof and moisture-proof measures shall be taken during the storage period, and shall be placed in a covered warehouse during storage. Packaging machinery and conveying machinery can be said to be an indispensable link in the production of large-scale products. Before the flexible conveyor passes through the packaging, it passes through the conveyor line to reach the link of the packaging machinery and then conveys the combination of other links to produce the molded product. It's just right.

Flexible conveyor adopts standardized and serialized design, which can be applied to the open conveying of materials in various industries. It has the characteristics of lightness and durability, reasonable structure, beautiful appearance, and convenient use. The flexible conveyor can transport bulk materials as well as bags, bags, boxes, etc. after packaging materials. The flexible conveyor is made of stainless steel. The conveyor belt is a chain plate, no exposed fasteners, new design, beautiful and generous; stable and reliable conveying performance, infinite scheduling, easy to use; used for precision equipment with good appearance and high quality Supporting the use of.

What are the common faults and solutions?

1. Common faults: The motor cannot start or slows down immediately after starting.

Failure analysis: line failure; b voltage drop; C contactor failure; d continuous operation within 1.5 seconds.

Treatment method: check the circuit; check the voltage; check the overloaded electrical appliances; reduce the number of operations.

2. Common fault: motor heats up;

Analysis of the cause of the failure: due to overload, overlength, or jamming of the flexible conveyor belt, the running resistance increases, and the motor is overloaded; due to poor lubrication conditions of the transmission system, the motor power increases; the motor fan air inlet or radial heat dissipation Dust accumulates in the film, worsening the heat dissipation condition.

Treatment method: measure the power of the motor, find out the cause of overload operation, and treat it symptomatically; add lubrication to each transmission part in time; remove dust.

How to deal with the deviation of the conveyor belt?

1) Check the misalignment between the horizontal centerline of the roller and the vertical centerline of the flexible conveyor. If the misalignment value exceeds 3mm, the long mounting holes on both sides of the roller set should be used for adjustment. The specific method is which side of the conveyor belt is biased, which side of the roller set moves forward in the direction of the conveyor belt, or the other side moves backward.

(2) Check the position of the material on the conveyor belt. If the material is not centered on the cross-section of the conveyor belt, it will cause the conveyor belt to deviate.

A flexible conveyor is not only powerful but also in large supply. If you are engaged in the flexible conveyors business, you may consider using our high-cost performance products.