Toothed Pulley Timing Belt Driven Steel Conveyor Roller

Series R2280 Toothed Pulley Timing Belt Driven Roller

Application area

Internal driven conveyor systems, the toothed pulley is fixed at the end of the roller which makes the driven and the conveying separately in zone. Widely applied in medium load conveyors to transport cases, carboards, containers, barrels or tires.

Heavy load capacity

The toothed pulley is driven by T5 timing belt, it has compact structure and simple design without tensioning. It is more efficient without slip synchronous in transportation, it has bigger conveying capacity compare to with other belt drives.

High speed and low noisy

Toothed pulley drive, precision ball bearing and polymer bearing housing which makes the roller has the advantages of smooth running, low noisy and high speed up to 120 m/min.

Wider range of working environment

Compared with traditional belt drive, it is waterproof and has the ability to work in a certain bad environment. Besides clean room, it is also can be applied in harsh environment with the use of PU synchronous belt.

Lateral loading

Standard configuration, the bearing housing with end cap and bearing is pressed into the roller tube and the tube ends are rounded, thereby allowing materials to be easily moved on from the side.

Technical data

Diagram of R2280 Toothed Pulley Belt Driven Roller

Dimension of series R2280 timing belt driven roller with female thread installation

Timing belt selection

The center distance of the timing belt arrangement is strictly limited (recommended tolerance +0.5/0 mm). The common pitch and the toothed belt type are shown in the following table.