+86 13305721922
You are here: Home » Products » Gravity Roller » Anticorrosive PVC Sleeve Carbon Steel Gravity Conveyor Roller
Share to:

Anticorrosive PVC Sleeve Carbon Steel Gravity Conveyor Roller

Material:
Mounting Method:
Surface Treatment:
Shaft Type:
Availability:
Quantity:
  • GR200
  • RONWIN
  • HS Code: 8431390000

Character & Advantage of GR200 Anticorrosive PVC Sleeve Carbon Steel Gravity Conveyor Roller

  1. As the typical product in the gravity roller series, it is widely applied, especially in the carton conveying area, e.g. airport luggage handling and logistic distribution center.Precision ball bearing, polymer bearing housing and end cap form the bearing unit which is very important. It is not only for good looking but also further more for the smooth and quiet running.

  2. The end cap of roller resists dust and water splash well in working environment.

  3. The design of polymer bearing housing makes it able to operate in some special environment.

  4. The lubricating method of bearing could be oil lubricating or grease lubricating as requirement.

  5. Suitable for the high speed conveying. Speed could vary according to diameter and length of roller, max speed up to 120m/min.

  6. Temperature range -5℃ to +40℃.


PVC Sleeve

Traditional rubber lagging on surface, you could also choose the solution of PVC elastic sleeve of 2mm thickness on the roller.

1. Well protecting the bottom surface of conveyed goods (e.g. glass, SS wortle plate).

2. Well noise reduction and shock absorption.

3. Compared with steel tube, increase the friction force of roller surface, improve the convey performance of goods.

4. Shorter leadtime and higher cost performance than traditional rubber lagging.

Diagram of GR200 Anticorrosive PVC Sleeve Carbon Steel Gravity Conveyor Rolleruniversal gravity conveyor roller

Dimensions & Alternative Material of GR200 Anticorrosive PVC Sleeve Carbon Steel Gravity Conveyor Roller

dia.×Tshaft dia.female threadspring loadedflat millingb×hmaterial
Φ38×1.2Φ8/Φ10/Φ12/11hexL=W+10E=W+9E=W+910×11steel, stainless steel
Φ50×1.5Φ12/Φ15/11hexL=W+10E=W+9E=W+910×11steel, stainless steel, Aluminium
Φ50×2.5Φ12/Φ15/11hexL=W+10E=W+9E=W+910×11PVC
Φ60×2Φ12/Φ15/11hexL=W+10E=W+9E=W+912×11steel, stainless steel, Aluminium
Φ76×3Φ15/Φ20/11hexL=W+12E=W+11E=W+1116×15steel
Φ80×3Φ20L=W+12E=W+11E=W+1116×15steel


Previous: 
Next: 

Product Category

No. 133 Wangta Road, High-tech Zone, Huzhou, Zhejiang, China
+86 (0)572 2590 232
+86 133 0572 1922
Quick Contact

Home

Longwei Automatic is a medium-sized company which is involved in manufacturing of conveyors, rollers and other conveyor parts for over 20 years.  The new manufacturing facility covers an area of about 30,000 square meters